How to Measure a Room for Flooring, Paint and Tiles

Almost every home project starts with the same question: how big is the room? Measuring takes ten minutes, but small mistakes — the wrong wall, a forgotten alcove, rounding down — are what send people back to the store. Here is how to measure floors and walls accurately, in feet and inches or in metres.

By Rohan Vijay · Checked by Shivam Sharma and Muskan Gupta · Updated

What you need

  • A tape measure (a laser measure is quicker for big rooms, but a tape is fine).
  • Paper and pencil, or your phone’s notes — sketch the room as you go.
  • A helper for long walls, if you have one.

Measure to the nearest ¼ inch or 5 mm. That is precise enough for buying materials; the waste allowance covers the rest.

Measuring floor area (flooring, tiles, carpet)

  1. Sketch the room’s outline, including alcoves, bay windows and closets.
  2. Measure the length and width wall to wall, at floor level. Ignore skirting boards or baseboards — measure to the wall behind them.
  3. Measure each dimension twice, at different points. Older rooms are rarely square; use the larger figure.
  4. Multiply length × width for each rectangle and add them up.

Floor area = length × width (for each rectangle, then add)

Carpet off a roll is the exception: it comes in fixed widths, so you buy a length of the roll rather than the exact floor area. The carpet calculator works out the length to cut and whether you need a seam.

Feet and inches

To multiply feet and inches, turn the inches into a fraction of a foot by dividing by 12 — 3 in is 0.25 ft, 6 in is 0.5 ft, 9 in is 0.75 ft. A room 12 ft 6 in × 10 ft 3 in is 12.5 × 10.25 = 128.13 ft². Or type the feet and inches straight into the square footage calculator.

L-shaped and irregular rooms

Split the floor into rectangles that do not overlap, measure each one, and add the areas. For example, an L-shaped room made of a 12 × 10 ft rectangle and a 6 × 4 ft rectangle is 120 + 24 = 144 ft². In metric, a 4 × 3 m area plus a 2 × 1.5 m area is 12 + 3 = 15 m². Angled bay windows are close to a trapezoid; curved areas can be treated as part of a circle.

What to include

  • Include closets, alcoves and the space under appliances that will sit on the new floor.
  • Include doorways where the new floor will run to a threshold strip.
  • Exclude built-in units, kitchen islands and fixed baths that the floor will stop at.

Measuring wall area (paint, wallpaper, tiles)

For walls, you need the distance around the room (the perimeter) and the wall height.

Wall area = 2 × (length + width) × height − doors − windows

Measure the height from the floor to the ceiling in a few places. A 12 × 12 ft room with 8 ft walls has 2 × (12 + 12) × 8 = 384 ft² of wall. A 4 × 4 m room with 2.4 m walls has 38.4 m².

Doors and windows

For paint, subtract openings so you do not over-buy. If you do not want to measure each one, typical sizes work:

OpeningUS (typical)UK (typical)
Interior doorabout 20 ft²about 1.6 m²
Windowabout 15 ft²about 1.5 m²

For wallpaper, do not subtract openings: you still need short pieces above and below them, and offcuts rarely fit. For wall tiles, subtract large openings and fitted units, but measure each wall separately because tiles often stop at different heights.

Turning measurements into materials

ProjectMeasurement you needCalculator
Laminate, vinyl or wood floorFloor areaFlooring calculator
Floor or wall tilesFloor or wall area + tile sizeTile calculator
PaintRoom size, or wall areaPaint calculator
WallpaperPerimeter + wall heightWallpaper calculator
Drywall / plasterboardRoom size + wall heightDrywall calculator

Common measuring mistakes

  • Rounding down. Always round up — 11 ft 8 in is closer to 12 ft than 11 ft when you are buying.
  • Mixing units. Keep a room entirely in feet and inches or entirely in metres; convert at the end, not halfway.
  • Forgetting waste. The measured area is not what you buy — cuts and breakages add 5–20% depending on the material. See how much extra material to buy.
  • Measuring once. Walls bow and corners are not square. Two measurements per dimension catch most surprises.

Calculators for this project