How to use the wallpaper calculator
- Choose whole room and enter the room’s length and width, or one wall for a feature wall.
- Enter the wall height from skirting or baseboard to ceiling.
- Find the pattern repeat on the roll label (0 if plain or random match).
- Check the roll size on the label — the defaults are a US double roll and a standard UK roll.
How wallpaper is calculated
Wallpaper goes up in vertical strips (drops), and short offcuts are rarely usable. So the calculator works out how many full-height strips you can cut from each roll, then how many strips cover your walls.
Strip length = wall height + pattern repeat + trimming (4 in / 10 cm) Strips per roll = roll length ÷ strip length (rounded down) Strips needed = total wall width ÷ roll width (rounded up) Rolls = strips needed ÷ strips per roll (rounded up)
Worked example (US)
A 12 × 12 ft room has 48 ft (576 in) of wall. With 20½-inch paper that is 28.1, so 29 strips. Each strip is 8 ft + 4 in, and a 33 ft double roll gives 3 strips. 29 ÷ 3 = 9.7, so buy 10 double rolls.
Worked example (UK)
A 4 × 3.5 m room has 15 m of wall: 15 ÷ 0.53 = 28.3, so 29 strips. Each strip is 2.4 + 0.1 = 2.5 m, giving 4 strips per 10.05 m roll. 29 ÷ 4 = 7.25, so buy 8 rolls.
Wallpapering tips
- Check batch numbers. Buy all your rolls with the same batch (or shade) number — colours can vary between batches.
- Buy a spare roll. Many shops take back unopened rolls, and a spare from the same batch is invaluable for repairs.
- Prepare the walls. Fill cracks, sand smooth and size (seal) new plaster or drywall so the paper slides into place and comes off cleanly later.
- Painting the other walls? The paint calculator works out how much you need.
Frequently asked questions
How many rolls of wallpaper do I need for a 12 × 12 room?
With 8 ft walls and standard US double rolls (20½ in × 33 ft), you can cut 3 full-height strips per roll and need 29 strips to go round the room — so 10 double rolls for a plain or random-match paper. A large pattern repeat can push that higher.
How many rolls of wallpaper for a UK room?
A standard UK roll is 10.05 m long and 53 cm wide. In a 4 × 3.5 m room with 2.4 m walls you get 4 strips per roll and need 29 strips, so 8 rolls of plain paper, or 10 rolls with a 53 cm pattern repeat.
What is a pattern repeat?
It is the distance before the design repeats down the roll. To line the pattern up across the joins, each strip can waste up to one repeat, so bigger repeats mean fewer strips per roll. Plain papers and “random match” designs have no repeat.
Should I subtract doors and windows?
Usually not. You still need short pieces above and below them, and the offcuts rarely cover those areas neatly. For a room with very large windows or sliding doors you might save a roll — but leftover paper is useful for repairs.
What is the difference between a single and a double roll?
US wallpaper is priced by the single roll but sold in double rolls — about 20½ in × 33 ft (56 ft²). UK and European rolls are about 53 cm × 10.05 m (5.3 m²). This calculator counts the rolls you actually receive; enter your paper’s width and length if they differ.