Carpet Calculator

Work out how much carpet to buy from a fixed-width roll — the length to cut, the area in square feet, square yards or square metres, whether you need a seam, and how much underlay to order.

Calculate carpet for a room

ft m
Longest point, into doorways
ft m
Widest point, into alcoves
ft m
The width your carpet is sold in
in cm
Added to each dimension
$/ft² £/m²

Results

How to use the carpet calculator

  1. Measure the room’s length and width at the longest and widest points. Measure into doorways (to the middle of the door when closed) and into any alcoves or bay windows.
  2. Enter the roll width for the carpet you have chosen — usually 12 ft in the US, or 4 m or 5 m in the UK.
  3. Leave the trimming allowance at 3 inches (10 cm) unless your fitter asks for more. Patterned carpet needs extra to match the pattern at seams.
  4. The calculator tries the carpet running both ways across the room and shows the layout that uses the least.

How the carpet is worked out

Strips needed = (room width + trim) ÷ roll width, rounded up Length to cut = strips × (room length + trim) Carpet to buy = length to cut × roll width Square yards = square feet ÷ 9

The same sum is done with the carpet turned the other way, and the smaller result is used. Every strip runs in the same direction, so the pile matches across seams.

Worked example (US)

A 14 × 11 ft bedroom and a 12 ft roll. With 3 inches of trim the room is 14 ft 3 in × 11 ft 3 in, which fits within one width of the roll. You need 14 ft 3 in of carpet: 14.25 × 12 = 171 ft², or 19 yd² — about 11% more than the 154 ft² floor, with no seams.

Worked example (UK)

A 4.2 × 3.6 m living room and a 4 m roll. With 10 cm of trim the room is 4.3 × 3.7 m, so one width covers it. You need 4.3 m of carpet: 4.3 × 4 = 17.2 m² for a 15.12 m² floor, with no seams.

When the room is wider than the roll

A room wider than the roll needs a second strip and a seam. If that strip is a full-length piece, you can end up buying nearly twice the floor area — a 15 × 13 ft room takes 26 ft 6 in of a 12 ft roll (318 ft² for a 195 ft² floor).

Fitters usually avoid that by cutting the narrow fill strip from a shorter length: several narrow pieces are cut side by side and joined end to end, all with the pile running the same way. Tick the fill strip option to see this — the same room then needs 17 ft 8 in (212 ft²), at the cost of two short cross seams, which are best hidden along a wall or under furniture. A wider roll (13 ft 6 in, 15 ft or 5 m) may avoid the seam altogether.

Common carpet roll widths

WhereStandard widthsPriced by
US12 ft (most common), 13 ft 6 in, 15 ftSquare foot or square yard
UK4 m and 5 m; some ranges 2 m or 3 mSquare metre

Underlay, stairs and other extras

  • Underlay or pad does not have a pile direction, so you only need the floor area plus about 5% for cuts.
  • Gripper (tack strip) runs around the edge of the room: measure the perimeter and leave out doorways.
  • Stairs are measured separately — each step needs the tread and riser depth (about 18 in or 46 cm in total) across the width of the stair, plus extra for winders and landings.
  • Carpet tiles and planks are sold by the box rather than off a roll — use the flooring calculator.

Not sure of the room’s measurements? See how to measure a room. Always have the retailer or fitter confirm measurements before the carpet is cut — cut carpet cannot usually be returned.

Frequently asked questions

How do I work out how much carpet I need?

Measure the room at its longest and widest points, going into doorways and alcoves, and add about 3 inches (10 cm) to each for trimming. Carpet comes off a roll of fixed width, so you buy a length of the roll — not the exact floor area. A 14 × 11 ft room needs 14 ft 3 in off a 12 ft roll: 171 ft², or 19 square yards.

How wide is a roll of carpet?

In the US, most carpet is 12 ft wide, with some ranges also sold in 13 ft 6 in and 15 ft widths. In the UK, the standard widths are 4 m and 5 m, and some ranges come in 2 m or 3 m as well. Check which widths your chosen carpet is made in before measuring up.

How do I convert square feet of carpet to square yards?

Divide by 9, because a square yard is 3 ft × 3 ft. For example, 171 ft² ÷ 9 = 19 yd². To go from square metres to square yards, multiply by 1.196.

Why do I have to buy more carpet than the area of my room?

Because the roll is a fixed width and every piece has to run the same way so the pile matches. If the room is narrower than the roll, the offcut along one side is waste. If it is wider, you need a second strip and a seam. Typical waste is 5–15% in a simple room and can be much more when the room is just wider than the roll.

Where should carpet seams go?

Keep seams out of doorways and the main walking routes, and where you can, run them towards the main window so daylight falls along the seam rather than across it. All strips must have the pile running in the same direction, or the pieces will look like different shades.

Built by Paras Garg and checked by Shivam Sharma and Muskan Gupta. Formulas and figures last reviewed on . Results are estimates: product yields vary, so check manufacturer labels and local building rules before you buy or build. Spotted an error? Tell us.