Board Foot Calculator

Calculate the board feet, cubic volume and total length of lumber or timber from its thickness, width, length and quantity — and estimate the cost by the board foot or by the metre.

Calculate board feet and timber volume

in mm
in mm
ft m
$/board ft £/metre

Results

How to use the board foot calculator

  1. Enter the thickness and width of the board — nominal sizes for US softwood lumber, or the size your supplier quotes.
  2. Enter the length of one piece and how many pieces you need.
  3. Optionally add a price per board foot (US) or per metre of length (UK) to estimate the cost.

The board foot formula

Board feet = thickness (in) × width (in) × length (ft) ÷ 12 × pieces Cubic metres = thickness (m) × width (m) × length (m) × pieces 1 m³ ≈ 423.8 board feet

Worked example (US)

Ten 1 × 6 boards, each 8 ft long: 1 × 6 × 8 ÷ 12 = 4 board feet each, so 40 board feet in total. At $4.50 per board foot, that is $180.

Worked example (UK)

Ten lengths of 47 × 100 mm timber, each 2.4 m long: 0.047 × 0.1 × 2.4 = 0.0113 m³ each, so 0.113 m³ and 24 linear metres in total — about 47.8 board feet.

Nominal vs actual US lumber sizes

NominalActual (dry, planed)Board feet per 8 ft
1 × 4¾ × 3½ in2.67
1 × 6¾ × 5½ in4
2 × 41½ × 3½ in5.33
2 × 61½ × 5½ in8
2 × 81½ × 7¼ in10.67
2 × 101½ × 9¼ in13.33
4 × 43½ × 3½ in10.67

Hardwood thickness: the quarter system

Rough-sawn hardwood is sold by thickness in quarters of an inch, written as a fraction. Board feet are calculated on the rough (nominal) thickness, even though planing makes the finished board thinner.

Quarter sizeRough thicknessTypical thickness after planing (S2S)
4/4 (“four quarter”)1 inabout 13/16 in
5/41¼ inabout 1 1/16 in
6/41½ inabout 1 5/16 in
8/42 inabout 1¾ in
12/43 inabout 2¾ in

Board feet vs linear feet

A linear foot measures length only; a board foot measures volume. They are only the same for a board 1 inch thick and 12 inches wide. A 1 × 6 has half a board foot per linear foot, a 2 × 6 has one, and a 2 × 12 has two. Dimensional lumber and trim are usually priced per piece or per linear foot, while hardwood is priced per board foot — so convert before comparing prices.

How much extra hardwood to buy

Rough hardwood has knots, splits, checked ends and uneven edges that you cut away, and planing removes thickness. Woodworkers commonly add 20–30% to the board feet a project needs; for decking, framing and other dimensional lumber, 10–15% is usually enough. See how much extra material to buy for other materials.

Common UK timber sections

  • CLS studwork: 38 × 63 mm and 38 × 89 mm, for stud walls.
  • Sawn treated timber: 47 × 100, 47 × 150 and 47 × 200 mm, for joists, decking frames and garden projects.
  • Planed timber (PSE/PAR): smaller finished sizes, such as 18 × 94 mm, for shelving and trim.

Planning a deck? The decking calculator counts boards and joists for you.

Frequently asked questions

How do you calculate board feet?

Multiply thickness (inches) × width (inches) × length (feet) and divide by 12. A 1 × 6 board 8 ft long is 1 × 6 × 8 ÷ 12 = 4 board feet. One board foot is a piece 1 inch thick, 12 inches wide and 12 inches long — 144 cubic inches.

Do I use nominal or actual sizes for board feet?

Softwood dimensional lumber (2 × 4, 2 × 6) is traditionally sold and calculated using nominal sizes, even though a 2 × 4 actually measures 1½ × 3½ inches. Rough-sawn hardwood is measured at its rough thickness in quarters: 4/4 is 1 inch, 8/4 is 2 inches. Use whichever your supplier quotes.

How many board feet are in a cubic metre?

One cubic metre is about 424 board feet, and one board foot is about 0.00236 m³. Hardwood in the UK and Europe is often priced per cubic metre (or per cubic foot), so this conversion helps compare prices.

How is timber sold in the UK?

DIY stores sell sawn and planed timber by the length (often 2.4 m, 3.0 m, 3.6 m or 4.8 m) in metric sections such as 47 × 100 mm or 38 × 63 mm CLS. Timber merchants also price hardwood by the cubic metre. The calculator gives both linear metres and cubic metres.

Built by Paras Garg and checked by Shivam Sharma and Muskan Gupta. Formulas and figures last reviewed on . Results are estimates: product yields vary, so check manufacturer labels and local building rules before you buy or build. Spotted an error? Tell us.