How to use the patio calculator
- Choose pavers or block paving (laid on sand), patio slabs (laid on a mortar bed) or a poured concrete slab.
- Enter the patio’s length and width, and how much of its edge runs along the house or another wall. For an irregular shape, switch to total area and enter the length of the open edges yourself — the square footage calculator can add up odd shapes.
- Enter the size and thickness of your pavers or slabs, or the thickness of the concrete. The defaults suit a garden patio.
- Add the prices you have been quoted to see the cost of the main items. Use Print results to take the list to the store or builders’ merchant.
What is on the list
A patio is a stack of layers, and each one has to be bought, delivered and placed. From the bottom up:
| Layer | Pavers | Slabs | Concrete |
|---|---|---|---|
| Dig out | Base + sand + paver | Base + mortar + slab | Base + slab |
| Membrane | Geotextile on the soil, 10% extra for overlaps | ||
| Sub-base | Crushed stone / MOT Type 1, 15% extra for compaction | ||
| Bedding | Sharp sand | 1:4 cement mortar | — |
| Surface | Pavers + cuts | Slabs + cuts | Concrete + spillage |
| Joints | Jointing sand | 1:4 pointing mortar | — |
| Edges | Edging and spikes, or kerbs | Bedded in mortar | Form boards and stakes |
The formulas
Dig depth = sub-base + bedding + paver thickness (or sub-base + slab for concrete) Soil to move = area × dig depth × 1.25 (soil swells once dug) Soil weight = area × dig depth × 1,700 kg/m³ Sub-base = area × depth × 1.15 Bedding = area × depth × 1.10 Joints = area × (1 ÷ (length + joint) + 1 ÷ (width + joint)) × joint × thickness Membrane = area × 1.10 Edging = open edge ÷ piece length (rounded up)
The patio is assumed to finish level with the surrounding ground. Pavers butted together still leave joints of about 3 mm (⅛ in) from their spacer nibs, which the jointing sand fills. Sand weighs about 1,600 kg/m³ and crushed-stone base about 2,100 kg/m³. Mortar is 1 part cement to 4 parts sharp sand.
Worked example (US)
A 12 × 10 ft patio of 4 × 8 in pavers, 2⅜ in thick, on 4 in of base and 1 in of sand: dig 7⅜ in deep, which loosens to about 3.4 yd³ of soil weighing about 3.9 tons. Then buy 132 ft² of membrane, 3.02 tons of base, 22 × 0.5 ft³ bags of sand, 567 pavers, 3 × 50 lb bags of polymeric sand, and 6 × 8 ft lengths of paver edging with 45 spikes for the 44 ft of open edge. As a 4 in concrete slab instead, the same patio needs 1.56 yd³ of concrete — 70 × 80 lb bags, or a small ready-mix load — plus 6 form boards and 16 stakes.
Worked example (UK)
A 4 × 3 m patio of 200 × 100 × 50 mm block paving on 100 mm of MOT Type 1 and 40 mm of sharp sand: dig 190 mm deep, or about 2.9 m³ of loose soil (3.9 tonnes). Buy 13.2 m² of membrane, 2.9 tonnes of sub-base, 0.84 tonnes of sharp sand, 630 blocks, 2 × 25 kg bags of kiln-dried sand and 16 edging kerbs for 14 m of open edge. With 600 × 600 × 22 mm sandstone slabs instead, it is 34 slabs on a 40 mm mortar bed of 8 × 25 kg bags of cement and 0.86 tonnes of sharp sand, with about 3 kg of cement and 14 kg of sand to point the 10 mm joints.
The order of work
- Mark out the patio with pegs and string, and set the levels with a fall away from the house.
- Dig out to the full depth and remove the soil. Book the skip or dumpster before you start.
- Compact the ground, lay the membrane and fix edging or formwork.
- Spread and compact the sub-base in layers of about 2 in (50 mm) with a plate compactor.
- Lay the bedding and the pavers or slabs — or pour the concrete — then fill the joints.
Step-by-step instructions are in the guides to laying a paver patio and planning a concrete patio. To count pavers alone for a path or driveway, use the paver calculator.
Tools to buy or hire
- Every patio: spade and shovel, wheelbarrow, rake, tape measure, pegs and string line, spirit level and a long straight edge, and a plate compactor (usually hired by the day).
- Pavers and slabs: rubber mallet, screed rails, a block splitter or an angle grinder with a stone or diamond blade, and a stiff brush for the jointing sand. Wear eye, ear and dust protection when cutting.
- Concrete: a cement mixer for more than a few bags, a tamping board, a float and an edging tool.
Pavers, slabs or concrete?
| Pavers / block paving | Patio slabs | Poured concrete | |
|---|---|---|---|
| Laid on | Sand, no mortar | Full mortar bed | Compacted base |
| Can be done in stages | Yes | Yes | No — pour in one go |
| Repairs | Lift and relay single pavers | Replace single slabs | Patch or resurface |
| Most heavy work | Base and laying | Mixing mortar | Mixing or placing concrete |
Frequently asked questions
How deep should I dig for a patio?
Add up every layer: the sub-base, the bedding layer and the paver or slab itself. A paver patio on 4 in of base and 1 in of sand needs about 7½ in (190 mm) of digging, and a 4 in concrete slab on 4 in of base needs 8 in. In the UK, block paving on 100 mm of MOT Type 1 and 40 mm of sand is about 190 mm deep. Where a patio meets the house, keep the finished surface at least 150 mm (6 in) below the damp-proof course.
How much soil will I dig out, and what skip do I need?
Multiply the area by the dig depth, then add about a quarter, because soil loosens and swells once it is dug. A 12 × 10 ft patio dug 7½ in deep fills about 3.4 cubic yards; a 4 × 3 m patio dug 190 mm deep fills about 2.9 m³, roughly a 4-yard skip. Soil is heavy, at around 1.6–1.8 tonnes per cubic metre before digging, so tell the skip or dumpster company it is soil: many limit how full you can fill a container with heavy waste.
Do I need a membrane under a patio?
A geotextile or weed membrane between the soil and the sub-base stops the base sinking into soft ground and keeps weeds from growing up through it. It is worth using on clay or soft soil and costs little. It goes under the sub-base, not under the sand, so water can still drain through the joints. Overlap the strips by about 150 mm (6 in).
How much fall does a patio need?
Slope the patio away from the house so rain runs off. In the US, about ⅛–¼ in per foot is usual; UK guidance for paving is around 1 in 60 to 1 in 80 (about 15 mm per metre). Over a 3 m (10 ft) patio, that is roughly 40 mm (1½ in) from the house side to the far edge. Set the fall in the sub-base so every layer above follows it.
What do I fill the joints with?
Block paving and concrete pavers are jointed with kiln-dried sand brushed in and vibrated down, or polymeric sand, which hardens when wetted and resists weeds and ants. Patio slabs with wider joints are pointed with a sand and cement mortar (about 4:1) or a ready-mixed jointing compound. The calculator works out the joint volume from the size and thickness of your pavers or slabs.